Fabric Shade Wall Sconce
Fabric Shade Wall Sconce
Couldn't load pickup availability
- Shipping calculated at checkout
- Delivery estimates shown at checkout
A fabric shade on a long iron arm. The arm runs 58 cm and stands 20 cm off the wall, which is further than most sconces reach and the reason this one works over a chair or a bed rather than only beside it. The shade is 16 cm high and 13 cm across, small in proportion to the arm, and the woven fabric softens the light before it leaves. Iron takes the finish, either baked black paint or electroplated brass, and the base plate measures 12 by 15 cm.
Reach is what you are buying. Mounted above and behind a reading chair, the shade sits over your shoulder and drops light onto the page the way a floor lamp would, without a base to walk around. Over a bed it does the same for one side. In a living room, positioned at the end of a sofa, it lights the seat rather than the wall. The fabric keeps the source hidden from anyone sitting across the room.
An LED source is used, running at 110 to 240V through a hardwired wall box, and the arm should be fixed into a stud or with proper anchors given its length. Vacuum the shade gently with a brush attachment and keep the fabric dry. Vandora chose the brass finish for warm rooms and the black for rooms that already have enough going on.
- Fixture type: Wall sconce
- Material: Iron with fabric lampshade
- Finish: Baked paint and electroplating
- Light source: LED
- Dimensions: Total length 58 × 16 cm (22.8 × 6.3 in); wall distance 20 cm (7.9 in)
- Base: 12 × 15 cm (4.7 × 6 in)
- Shade: 16 cm (6.3 in) high × 13 cm (5.1 in) diameter
- Voltage: 110–240V
- Colour options: Black, brass
Frequently Asked Questions
How far does the arm reach from the wall?
The arm extends 58 cm and stands 20 cm off the wall, further than most sconces, which is why it can reach over a chair or bed rather than only sitting beside one. Mounted above and behind a reading chair, the shade ends up over your shoulder and drops light onto the page much like a floor lamp would. The reach is really what you are buying with this design.
Which finish should I choose?
Black baked paint suits a room that already has a lot going on, while the electroplated brass adds warmth to a room that could use it. Both use the same iron arm and fabric shade, so the choice is purely about finish. The base plate measures 12 by 15 cm in either finish.
Is it strong enough to mount safely given how far it extends?
Given the arm's length, it should be fixed into a wall stud or with proper anchors rated for the load, rather than into drywall alone. Once mounted correctly, the iron arm holds its position without sagging. Check the wall structure at the mounting point before installing.
What does the fabric shade do to the light?
The woven fabric softens the light before it leaves, so the source itself stays hidden from anyone sitting across the room. It uses an LED light source, running on 110 to 240V through a hardwired wall box. Over a chair or bed, that gives focused but gentle light rather than a hard beam.
How do I clean the shade?
Vacuum it gently with a brush attachment to lift dust from the fabric without flattening it. Keep the fabric dry rather than wiping it with a damp cloth. The iron arm and base plate can be dusted separately with a dry cloth.
Chosen piece by piece