Nordic Wood Wall Lamp
Nordic Wood Wall Lamp
Couldn't load pickup availability
- Shipping calculated at checkout
- Delivery estimates shown at checkout
Pull the chain and the room warms. That switch is the character of this lamp: a short cord hanging from the underside, operated by feel rather than found on a wall, which is why it ends up beside beds. The shade is smooth metal, tilted down, with a wooden collar where it meets the arm and a wooden detail at the base. The whole fitting stands 16 cm high, 15 cm wide and reaches 10 cm from the wall, so it clears a headboard.
The angled shade means the light lands where the shade is pointed and nowhere else, a defined patch rather than a wash. Over a nightstand that patch covers a book. In a hallway, mounted higher, it lights the floor ahead of you. Above a dining sideboard it gives the surface a lit edge, and a pair either side of a mirror does the same thing symmetrically. The wood keeps it from reading as hardware, which matters at close range.
It takes an E27 bulb, LED compatible, and mounts to a standard wall box; a warm bulb around 2700K matches the wood best. The chain needs a clear drop below the shade, so allow for it when you set the height. Wipe the metal with a dry cloth and leave the timber alone. Vandora keeps a pull-switch lamp on the list because reaching for a wall plate in the dark is a small daily annoyance.
- Fixture type: Wall lamp
- Material: Metal with wood accents
- Dimensions: 16 cm (6.3 in) high × 15 cm (6 in) wide × 10 cm (4 in) base
- Bulb: E27, LED compatible, not included
- Switch: Pull-chain
- Mounting: Wall mounted, indoor use
- Style: Nordic, minimalist
- Use: Bedroom, bedside, hallway, dining room, living room
Frequently Asked Questions
How do I turn it on and off?
It uses a pull-chain hanging from the underside of the shade, operated by feel rather than a wall switch, which is why it tends to end up beside beds. Allow a clear drop below the shade for the chain to hang and be reached easily. No separate wall plate is needed once it is wired in.
Will it clear my headboard?
Yes, the fitting stands 16 cm high and 15 cm wide and reaches only 10 cm from the wall, so it sits close and clears a headboard easily. That compact reach is also why it works well in a hallway or above a sideboard without protruding far. Mount it at a height where the angled shade lands where you want the light.
What bulb should I use?
It takes an E27 bulb, LED compatible, not included. A warm bulb around 2700K matches the wood accents best and keeps the overall tone consistent. The shade is angled downward, so the light lands in a defined patch rather than spreading across the ceiling.
Can I use a pair either side of a mirror?
Yes, mounted symmetrically either side of a mirror or above a dining sideboard, a pair gives the surface a lit edge on both sides. The wooden collar and base detail keep the look consistent whether used singly or in pairs. Space them evenly for the most balanced effect.
How do I clean it?
Wipe the metal shade with a dry cloth and leave the timber accents alone rather than treating them with oil or polish. Avoid damp cloths on the wood, since it is left in its natural finish. The pull chain rarely needs more than an occasional wipe.
Chosen piece by piece